The HD66750S, dot-matrix graphics LCD controller and driver LSI, displays 128-by-128-dot graphics for four monochrome grayscales. Since the HD66750S incorporates bit-operation functions and a 16-bit high-speed bus interface, it enables efficient data transfer and high-speed rewriting of data in the graphics RAM. The following functions allow the user to easily see a variety of information: a smooth scroll display function that fixed-displays a part of the graphics icons and perform vertical smoo

COB with metal frame, 5x7 dots with cursor, Built-in controller KS0066 or equivalent, +5V single power supply 1/16 duty cycle, LED B/L pins: 15/16, or A/K, or 1/2, Option: LED array/edge B/L, EL B/L, Option: +3V single power supply, Option: negative voltage built-in.

COB with metal frame, 5x7 dots with cursor, Built-in controller KS0066 or equivalent, + 5V single power supply, 1/16 duty cycle, LED B/L pins:A/K, or1/2,or 15/16, Option: LED,(4.2V), Option: +3V single power supply, Option: external negative voltage.

The SSD1303 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. It consists of 132 segments, 64 commons that can support a maximum display resolution of 132x64. Besides, there are 4-colour selections to support monochrome or area colour OLED/PLED. This IC is designed for Common Cathode type OLED panel.

COG package, Built-in controller SSD1851, +3V single power supply, 1/64 duty cycle, On chip LCD booster, 4-Gray scale.

FSTN LCD, TAB IC and PCB package, Built-in controller S1D13700, +3V ~ +5V single power supply, with built-in positive voltage for LCD driving, 1/240 duty cycle, Option: LED/white, Option: Touch panel & touch panel controller.

Description of any change Issued Effective 1.3 A6FA3 22-Sep-04 Amend U and U1 drawing and cut line tolerance in the appendix Add 82 Brightness control command and description for color banks P.19 and P.24 Amend D9 command and 8.1 command description Approver list: Ricky Ng, Raymond Ho, Frank Leung, Jimmy Chiu Jack Tsang 07-Oct-04 1.4 A6FA3 24-Nov-04 Amend write data hold time to 7ns min in Table 10 and 11 Amend data to 8bits in figure 11 Approver list: Ricky Ng, Raymond Ho, Frank Leung, Jimmy Ch

COB with metal frame, 5x7 dots with cursor, Built-in controller KS0066 or equivalent, + 5V single power supply, 1/16 duty cycle LED B/L pins:1/2, Option: array LED B/L.

The SSD1339 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. It consists of 396 segments (132RGB), 132 commons and 2 smart icon lines. This IC is designed for Common Cathode type OLED panel. The SSD1339 displays data directly from its internal 132x133x18 bits Graphic Data RAM (GDDRAM). Data/Commands are sent from general MCU through the hardware selectable 6800/8000 series compatible Parallel Interface or Serial Pe

COG package, Built-in controller PCF8531, +5V power supply, 1/32 duty cycle, Option: LED, I2C series interface.