COB with metal frame, 5x7 dots with cursor, Built-in controller KS0066 or equivalent, + 5V single power supply, 1/16 duty cycle B/L pins: 15, or A/K, or 1/2, No Negative Voltage Option.

The SED1560 Series are intelligent CMOS LCD drivercontrollers with the ability to drive alphanumeric and graphic displays. The SED1560 Series communicates with a high- peed microprocessor, such as the Intel 80XX family or the Motorola 68XX family, through either a serial or an 8-bit parallel interface. It stores the data sent from the microprocessor in the built-in display data RAM (166 ´ 65 bits) and generates an LCD drive signal. These devices incorporate an internal DC/DC converter to genera

COG package, Built-in controller ST7528, +3.3V power supply, 1/128 duty cycle, +2.0V~+3.6V single power supply, On chip LCD booster, 4 wire Serial Peripheral Interface(SPI), 16 gray scale.

FSTN LCD, TAB IC and PCB package, Built-in controller S1D13700, +3V ~ +5V single power supply, with built-in positive voltage for LCD driving, 1/240 duty cycle, Option: EL B/L & EL inverter, Option: Touch panel & touch panel controller ADS7846.

COB with metal frame, 5x7 dots with cursor, Built-in controller KS0066 or equivalent, . + 5V single power supply,1/16 duty cycle, LED B/L pins:15/16, or A/K, or 1/2, Option: LED array/edge B/L , EL B/L, Option: +3V single power supply, Option: negative voltage built-in.

The SED1565 series is a series of single-chip dot-matrix liquid crystal display drivers that can be connected directly to a microprocessor bus. 8-bit parallel or serial display data sent from the microprocessor is stored in the internal display data RAM and the chip generates a liquid crystal drive signal independent of the microprocessor.

FSTN LCD, TAB IC and PCB package, LCD driver only (Recommending SED1335 controller, +3V ~ +5V single power supply, Option: built-in positive voltage for LCD driving, 1/160 duty cycle, Option: LED edge B/L, EL B/L , EL inverter, Option: Touch panel.

FSTN LCD, TAB IC, TCP package, Built-in controller S1D13700, +5V power supply, 8-Bit data bus, 1/160 duty cycle, Built-in Positive Voltage For LCD, Option: LED B/L, 16 gray scale.

COB with metal frame, 5x7 dots with cursor, Built-in controller KS0066 or equivalent, + 5V single power supply, 1/16 duty cycle, LED B/L pins:A/K, or 1/2, Option: LED array/edge B/L, EL B/L, Option: +3V single power supply, Option: negative voltage built-in.

The SED1520 is a dot matrix LCD driver LSI intended for display of characters and graphics. It generates LCD driving signals based on bit image display data supplied from an 8-bit or 16-bit microcomputer and stored in the on-chip display data RAM.