The CM1450 comprises a family of inductor-capacitor (L-C) based EMI filter arrays with integrated ESD protection in a CSP form factor. The CM1450-06 and CM1450-08 are configured in 6 and 8 channel formats respectively. Each EMI filter channel of the CM1450 is implemented as a 5-pole L-C filter where the component values are 14pF-17nH-14pF-17nF-14pF. The CM1450's roll-off frequency at -10dB attenuation is 400MHz and can be used in applications where the data rates are as high as 160Mbps while

Advanced, high-speed parallel ports, conforming to the IEEE 1284 standard, are used to provide communications with external devices such as tape back-up drives, ZIP drives, printers, parallel port SCSI adapters, external LAN adapters, scanners, and other PC peripherals.

The CMCPCI100 is an 11-channel backplane interface/termination IC specifically designed for the latest version of the CompactPCI specification. The CMCPCI100 allows CompactPCI boards to interface to the backplane.

The CMV7101 is a high performance CMOS operational amplifier available in a small SOT23-5 package. Operating with very low supply current, it is ideal for battery operated applications where power, space and weight are critical.

Eight channels of EMI filtering with integrated ESD protection, Pi-style EMI filters in a capacitor-resistor- capacitor (C-R-C) network, ±15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge), ±30kV ESD protection on each channel (HBM), Greater than -35dB attenuation (typical) at 1GHz, NuDFN package with 0.40mm lead pitch, 16- lead: 3.5mm x 1.20mm x 0.50mm, Lead-free finishing.

The WLP200 consists of 6 RC filer with different filter characteristics in a wafer level package (WLP). All I/O pins are ESd protected for contact discharge up to 8KV per the IEC1000-4-2 level 4 specification. Two versions with different capacitor values are available.

CMD's CSPEMI606 and CSPEMI608 are EMI filter arrays with ESD protection, which integrate six and eight Pi- filters (C-R-C), respectively. The CSPEMI60x has component values of 15pF-100?-15pF. These devices include ESD protection diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports are designed and characterized to safely dissipate ESD strikes

The CM2020 HDMI Transmitter Port Protection and Interface Device is specifically designed for next generation HDMI Source interface protection. An integrated package provides all ESD, level shift, overcurrent output protection and backdrive protection for an HDMI port in a single 38-Pin TSSOP package.

The CM1215 family of diode arrays has been designed to provide ESD protection for electronic components or sub-systems requiring minimal capacitive loading. These devices are ideal for protecting systems with high data and clock rates or for circuits requiring low capacitive loading. Each ESD channel consists of a pair of diodes in series which steer the positive or negative ESD current pulse to either the positive (VP) or negative (VN) supply rail. The CM1215 will protect against ESD pulses up

CM1218-C4 Transient Voltage Suppressors / ESD Protectors, ESD Protection