Designed for use in DC-DC converters where high energy storage combined with low DCR is a requirement, Suitable for auto assembly and compatible with reflow process to 240?C, Useful in battery-powered and low voltage converters, Rugged design features with an extended operating temperature range of -40?C to +85?C.

Core type: 1.06" o.d., Iron Powder, perm 75, Power rating: 2.16 watts for temp. rise 50°C, Typical applications: Input and output filters in Switch Mode Power Supplies.

Economical "Channel Frame" construction, 2-hole horizontal mounting, Seven standard sizes, Lead length, 8 - 10".

The CBP1252 series Inductors are wound on "Drum" style ferrite cores and are ideal for use as Input/Output filter Inductors in Switch Mode Power Supplies.

Compact size, large inductance, Excellent frequency characteristic, Low magnetic flux leakage, Complies with UL,VDE safety requirements

Five sizes: 2, 6, 12, 24 and 48 VA ratings, Split bobbins for increased dielectric strength and low capacitive coupling, 115/230 volts, 47/63 Hz primary windings, CSA listed (LR 47366) and U.L. recognized (E100878).

Use of high loss ferrite materials for excellent hilgh frequency noise absorption,High impedance for normal mode applications,Designed to absorb high frequency noise from digital equipment data lines.

Core type:0.80" o.d., Iron Powder,perm 33, Power rating:1.2 watts for temp. rise 50 ?C, Typical applications:Filter Inductors in Switch Mode Power Supplies.

Primary rate ISDN network nodes. PBX or computer to T1/CEPT Digital trunks. High speed data link using T1/CEPT Digital trunk. TDM Multiplexers.

The CBP1254 series Inductors are wound on "Drum" style ferrite cores and are ideal for use as Input/Output filter Inductors in Switch Mode Power Supplies.