Core type: 1.30" o.d., Moly-Permalloy Powder, perm 125. Power rating: 3.13 watts for temp. rise 50°C. Typical applications: Switching Inductors in Switch Mode Power Supplies.

LP Filter The L6083 is a Low Pass filter designed to be used as a POTS Splitter in the ADSL link. L6083 meets the requirements ofANSI T1.413 and the T1/E1.4 8E14025R2 document.

The CBP1255 series Inductors are wound on "Drum" style ferrite cores and are ideal for use as Input/Output filter Inductors in Switch Mode Power Supplies.

Designed for use with National Semiconductor LM 259X series, Compact size and low cost,Meets flammability rating of UL 94V-0.

Core type:1.30" o.d., Iron Powder,perm 33, Power rating:3.13 watts for temp.rise 50 ?C, Typical applications:Filter Inductors in Switch Mode Power Supplies.

Primary Voltage, 115 Volts, 60 HZ. Primary and secondary leads 8-10" long. 4-hole vertical mounting. 13 sizes are available, convering the range: 100 to 500 VA. CSA listed (LR 47366).

Six sizes: 2.5, 5, 10, 20, 30, 56 VA ratings, Dual bobbins for increased dielectric strength (4000V RMS), 115/230 volts, 47/63 Hz primary windings, CSA listed (LR 47366) and U.L. recognized (E100878), Exceeds VDE, BSI and IEC requirements.

Five sizes: 2, 6, 12, 24 and 48 VA ratings, Split bobbins for increased dielectric strength and low capacitive coupling, 115/230 volts, 47/63 Hz primary windings, CSA listed (LR 47366) and U.L. recognized (E100878).

Frequency range from 200 to 500 kHz,20 Amp peak sense current,1500 Vrms isolation.

The 8626 series of SMD chokes is designed to cover an inductance range from 10?H to 1000uH with rated saturation currents from 0.18A to 1.84A.These are ideally suited for applications where shielding is required.