Current URL: |
Finisar Corporation
BENEFITSSupports Line Rates of up to 8.5 Gb/sSends
Features and specifications are subject to change without notice. 8/071389 Moffett Park DriveSunnyvale, CA 94089Phone: US Toll Free - 1 888.746.6484Phone: International - 1 408.400.1110E-mail: rdsales@finisar.comwww.finisar.comSTATISTICS INTERFACEThe Xgig 8.5 Gb/s FC BERT provides extensive and continuouslyupdated statistics based on transmitted and received data,including clock rate, elapsed time, calculated BER, sent framesstats, received frames stats, and compared frames stats. Portstatus is
BENEFITSHardware search logic makes itpossible to
DESCRIPTIONThe Bus Doctor RX from Finisar is a powerful modularconsumer electronics bus protocol analyzer. With advancedfeatures such as trace buffers as large as 4.6 GBs and 4nanosecond capture resolution, the RX is a unique platformable to analyze CE-ATA technology as well as other consumerelectronic and computing protocols.By connecting a MC (Memory Card) Pod fitted with a ZIF-basedinterposer board to a CE-ATA system consisting of a host anddrive, the RX becomes a dedicated CE-ATA protocol an
Finisars leading Xgig Analyzer is the most powerfu
features include triggering and filtering on all logical links, view -ing of separate Logical Link 0 and Logical Link 1, and Xgig Expert analysis of multiplexed traces. The Analyzer also shows SAS/SATA Out-of-Band (OOB) sequences - low-speed analog signaling OOB-based errors. By capturing the timing of every Data Burst and D.C. Idle on both sides of OOB negotiations, as well as automatically detecting OOB signaling patterns (COMWAKE, COMRESET, COMINIT, and COMSAS, each denoted using a different
Data Sheet: Bus DoctorTM SATA Analyzer
DESCRIPTIONThe Bus Doctor RX from Finisar is a powerful modular bus protocol Analyzer.With advanced features such as large trace buffers and 4 nanosecond captureresolution, the RX is a unique platform able to analyze SATA technology. By connecting a SATA Pod to a RX, the RX becomes a dedicated SATAprotocolAnalyzer. The Analyzer operates at line rate up to 3.0 Gb/s. There is also sup-port for SSC(Spread Spectrum Clocking), Serial ATA-II Extensions and ATAPI.The Analyzer is controlled by a Microso
FEATURES: Up to 3.0Gb/s SAS/SATA data linksHot-plu
DESCRIPTION 1VeetTransmitter ground (connected to receiver ground)2 TfaultTransmitter fault, Grounded within the module1TdisNot used4 MOD_DEF(2)Module Definition 2. Host line Plug-in ID1,2 5 MOD_DEF(1)Module Definition 1. Drive line Plug-in ID1,2 6 MOD_DEF(0)Module Definition 0. Grounded within the module1Rate Select8LOSLoss of Signal. Grounded within the module1VeerReceiver ground (connected to transmitter ground)10Receiver ground (connected to transmitter ground)11Receiver ground (connected to
Finisars Xgig Jammer was designed to ensure that F
Features and specifications are subject to change without notice. 02/091389 Moffett Park Drive Sunnyvale, CA 94089Phone (US Toll Free): 888.746.6484Phone Intl: 408.400.1000Email: networktools-sales@finisar.comwww.finisar.comJAMMING OPTIONSJamming events can be Ordered Sets or frames. The following list details the events on which the Jammer can operate:Ordered Set M Replace an Ordered Set with another Ordered Set, or corrupt it with errorsFM Any word in a frame may be replaced by a user-defined
BENEFITSTop notch test engineers with extensive in
BENEFITSTop notch test engineers with extensive in Medusa Labs; testing; test services
F i n i s a r Finisar Corporation 03/10/2000 Page
Description Pin Name Pin # Description RX_LOS 1 Receiver Loss of Signal CMOS Open Drain Output RGND 11 GND RGND 2 GND - RX_DAT 12 -RX RGND 3 GND +RX_DAT 13 +RX MOD_DEF(0) 4 TTL LOW (Tied to GND) RGND 14 GND MOD_DEF(1) 5 SCL CMOS Open Drain Serial Clock VDDR 15 VCC MOD_DEF(2) 6 SDA CMOS Open Drain Serial Data VDDT 16 VCC TX_DISABLE 7 Transmitter Disable, TTL Input TGND 17 GND TGND 8 GND +TX_DAT 18 +TX TGND 9 GND - TX_DAT 19 - TX TX_FAULT 10 TTL LOW (Tied to GND) - TX_FAULT Not Implemented TGND 20
Finisars Xgig Jammer is a powerful tool to modify
Features and specifications are subject to change without notice. 02/091389 Moffett Park Drive Sunnyvale, CA 94089Phone (US Toll Free): 888.746.6484Phone Intl: 408.400.1000Email: networktools-sales@finisar.comwww.finisar.comJAMMING OPTIONSJamming events can be Ordered Sets or frames. The following list details the events on which the Jammer can operate:Ordered Set and Primitive M Replace an Ordered Set and primitive with another Ordered Set and primitive or corrupt it with errorsFrame M Any word
COURSE O 4 DAYS Fundamental E FC-2 Fibre Channel F
COURSE O 4 DAYS Fundamental E FC-2 Fibre Channel F fibre channel protocol; fiber channel protocol; fibre channel protocol training; fiber channel protocol training; Fibre Channel training; Fiber Channel training; storage protocol training; Medusa Labs training; Medusa training; SAN training