The MAS9270 is an integrated circuit well suited to build VCTCXO for mobile communication. Temperature calibration is achieved in three calibration temperatures only. The trimming is done through a serial bus and the calibration information is stored in an internal PROM. This means no rework for trimming is needed.

MAS9255 is a fractional type charge pump that is especially designed for driving white LEDs. Each LED has its own current controlled output, which ensures excellent current matching between outputs and thus uniform brightness of LEDs.

MAS9164 is an LDO voltage regulator with lowground pin current of 10 ?A, which combined withthe good overall performance, makes MAS9164highly suitable for providing power to continuouslyworking low power circuits. The usage of MAS9164is beneficial especially in the applications wherestandby periods are long and in portable deviceswhere long battery life is essential.

The MAS9077 AM-Receiver chip is a highly sensitive, simple to use AM receiver specially intended to receive time signals in the frequency range from 40 kHz to 100 kHz.

The MAS1178 is an integrated circuit well suited to build VCXO for mobile communication. The trimming is done by a serial bus and the calibration information is stored in an internal PROM.

The MAS9271 is an integrated circuit well suited to make initial offset trimming of the crystal in oscillator. The trimming is done by a serial bus and the calibration information is stored in an internal PROM.

MAS9186 is 8-channel 8-bit DAC, designed primarily for trimmer replacement. Device is controlled by a simple 3-line input. The output buffers operate in the entire voltage range from ground to the positive power supply rail.

MAS9161 LDO voltage regulator is optimized for operation at low ground pin current of just 10.5 ?A. This combined with the good overall performance makes MAS9161 very suitable for providing continuous supply in low power circuits. The performance of MAS9161 benefits applications where standby periods are long and where long battery life is essential.

The MAS9078 AM-Receiver chip is a highly sensitive, simple to use AM receiver specially intended to receive time signals in the frequency range from 40 kHz to 100 kHz.

Piezoresistive, absolute silicon pressure sensor.