Module with low profile of 4.4mm.Can support side contact and bottom contact connectors.The specification that the user is demanding cancorrespond after it makes arrangements beforehand separately

CAM-D84These are 15 pins external interface connectors. IAM-D82, D83 is a cable assembly plug, and CAM-D84 is an SMT socket.2. This long-life connector can withstand 5,000times coupling/decoupling cycle life and has aone-touch locking mechanism. It has a thin style to allow it to be used in low-profile sets.

Small, light direct plug type. Supports worldwide input (AC100~240V). Complies with Electrical Appliance and Material Safety Law and UL standards. Output capacity : 12W (customer can specify output voltage and current)

Pecomem switch" is a sheet or board switch consists with PW board (rigid or flexible) and click spring for contact. Can be constructed unit thin size. Can be mounted various chip type devices on the base board of switches.

Consumption current VCEL=3.8V 2.5µA typ. Consumption current VCEL=2.3V 0.20µA typ. Input current between cells VCEL=3.8V ±0.3µA max. Overcharge detection voltage Type A 4.35V±50mV Overcharge detection delay time CT=0.22µF 1.5s typ. Detection voltage can be changed to accommodate customer needs

Thin, space-saving design for use in smallermobile products. Power supply and GND pin have doublecontact structure to ensure stable contact. Card detection switch detects card insertion.4.Half lock/release prevention mechanismprevents card drop-out and mistaken release.EMI measure taken with all-in-one plate andwing.

Operating supply voltage Operating ambient temperature Current consumption (no-load) Current consumption during Power Save Maximum output power

NIM type with OFDM demodulation IC. High sensitivity, low distortion. Full band (UHF/CATV/VHF). Same size as digital RF unit (BS/CS/CATV). TS output can use by parallel/serial. Shape is available for vertical and horizontal. No need BT (+33V) Loop through type (DVT33-J04DT).

Description Display PatternNormalLow Power Detection Precision MM1251Light OffFlashing30mVMM1252Light OnFlashing30mVMM1253Light Off Flashing9mVAbsolute Maximum Ratings(Ta=25C)Storage temperature -40~+125C Operating temperature -20~+70C Input voltage -0.3~+3V Output Terminal Applied Voltage -0.3~+7V Allowable loss300mWMITSUMI Remaining Battery Power Display MM1251, 1252, 1253 Electrical Characteristics(Unless otherwise specified Ta=25C, Vc=1.5V, Vs=0.8V)(Applicable to all models when the model na

17 pins connectors used for attaching andremoving between the operation panel and theunit.Misalignment absorption when fitted is±0.3mm in direction X, ±1.0mm in direction Yand ±0.5mm in direction Z.Supports reflow mounting. The cover and connector pins are linked as ameasure against socket contact deformation.The structure is such that when the cover islowered the contact pin contact portion alsolowers a certain amount. (The contact pinexposure outside the cover has been kep