Current URL:   


Omron Electronics LLC

omron.com

Miniature Limit Switch

center roller lever models that enable ganged mounting of up to 6 Switches. Cable connectors for easy Switch replacement. Triple-seal construction for plungers to provide IEC IP67 degree of protection. Operation indicators available for easy monitoring (standard indicator is lit when Switch is not operating). Approved by UL and CSA. (Ask your OMRON representative for Information on approved models.)

Relevant Keywords: 
D4CC-1002, D4CC-4003, D4CC-2001, D4CC-3, D4CC-3050, D4CC-1032, D4CC-4033, D4CC-2031, D4CC-3003, D4CC-1001, D4CC-4002, D4CC-2, D4CC-2060, D4CC-3033, D4CC-1031, D4CC-4032, D4CC-2024, D4CC-3002, D4CC-10, D4CC-4001, D4CC-1060, D4CC-2050, D4CC-3032, D4CC-1024, D4CC-4031, D4CC-2003, D4CC-3001, D4CC-1, D4CC-4, D4CC-1050, D4CC-4060, D4CC-2033, D4CC-3031, D4CC-1003, D4CC-4024, D4CC-2002, D4CC-30, D4CC, D4CC-3060, D4CC-1033, D4CC-4050, D4CC-2032, D4CC-3024

Ground Fault Relay

Performs continuous monitoring and detection of ground faults in low-voltage circuits due to the deterioration of insulation in electrical devices. Higher reliability ensured with improved resistance to high-frequency noise when used for inverter loads. Remote monitoring of cubicles is possible with automatic-reset models.

Relevant Keywords: 
K6EL-500, K6EL-R50, K6EL-30, K6EL-A500, K6EL-200, K6EL-A200, K6EL-100, K6EL-A100, K6EL, K6EL-R500

Smart Sensor Wide Laser Beam CCD Measurement Sensor ZX-GT

ZX-GT is the only sensor with the ability to measure and locate position to an accuracy of 10 ¬m without contact. Unlike conventional through-beam laser sensors, the ZX-GT's unique algorithm has the flexibility to meet a wide variety of applications, including the ability to accurately measure glass and mirror surfaces.

Relevant Keywords: 
ZX-GIF41A, ZX-GTC41, ZX-GT2840S11, ZX-GIF41, ZX-GTC11, ZX-GT2840, ZX-GIF11A, ZX-GT28S41, ZX-GT, ZX-GIF11, ZX-GT28S11, ZX-GSW11, Q154-E1-01, ZX-GT2840S41

ZX-T_CA_E_1_3

Relevant Keywords: 
ZX-T_CA_E_1_3

Enabling Grip Switch

The difficult task of configuring safety circuits is now easily achieved by combining the A4EG with the G9SX-GS. In addition to the standard models, the lineup also includes models with an emergency stop switch and models with a momentary operation switch. An optional Holding Key (sold separately) provides a versatile method for selecting modes. Equipped with conduit connector.

Relevant Keywords: 
A4EG-OP1, A4EG-C000041, C142-E1-01, A4EG-BM2B041, A4EG-OP3, A4EG-BE2R041, A4EG-OP2, A4EG

Watertight Cover

Four sizes (96 . 96, 72 . 72, 48 . 96, 48 . 48) are available. Conforms to IP66 or NEMA4 (indoors).

Relevant Keywords: 
Y92A-96N, Y92A-72N, Y92A-49N, Y92A-48N, Y92A

Syndicate content

Popular content