The CM3702 low-noise charge pump LDO regulator is designed to provide accurate and "clean" power to a subsystem, e.g an LED driver, audio codec or flash memory. The 5V output provides up to 100mA continuous current for input voltages from 3.0V to 5.5V, and up to 200mA for a narrower range. This is accomplished with an integrated charge pump that boosts the input voltage before feeding it to an internal LDO linear regulator. The charge pump is designed to maintain a nominal 0.8V differential between the input and output of the LDO regulator. This allows the LDO regulator to operate with good power supply ripple rejection across the audio band while maintaining good power efficiency. The charge pump works with two external capacitors and operates at 250kHz, well outside the audible frequency band. In addition, separate analog and digital ground pins are provided for the charge pump and the rest of the circuitry to eliminate ground noise feed-through from the charge pump to