SpecificationMeasuring Condition rated voltage at 85 3 C in high temperaturechamber for 96 4 hours and keep at normal conditionsfor 24 hoursPerform 5 cycles as follows:-25 C (30 min.) room temperature (5 min.) +85 C(30 min.) and keep at normal conditions for 24 1 hourVibration frequency range: 10~55HzTime:2 hours each in three different vertical directions(X, Y and Z axes, total 6 hours) Amplitude: 1.5 mmFix on 50 gram metal case and drop onto the concretefloor from a height of 1 meterImmerse in Pb-Sn solder at 230 5 C for 5 +1/-0 secondsPut on a hot plate at 270 5 C for 5 1 secondsand keep at normal conditions for 24 hoursExpose in low temperature chamber at -25 C for 96 4 hoursand keep at normal conditions for 1 hourApply a 100 gram load in the axis of the rotorExpose at 40 2 C, 90~95% RH for 96 4 hoursand keep at normal conditions for 1 hourRotate rotor 3 times until rotor slot is perpendicular tomounting pads, at 10 rpm. After that, take an initialreading of capacitance after 5 sec Multilayer Ceramic Chip Trimmer CapacitorsCTZ3 Ser