features The PSCC-1008E module is compatible with the PCI specification 2.3 and run on 32-bit bus size at 33 MHz frequency. Both 3.3 and offer compatibility with a wide range of carrier boards. Data transfer operations can be formatted in 8-bit, 16-bit, 24-bit or 32-bit wide. Octal UART The PSCC-1008E provides 8 enhanced 16550 UARTs with the PCI Bus interface Integrated FIFO Each UART has its own 64 Byte of transmit and receive FIFO, a set of 16550 compatible control and status registers, and a baud rate generator for individual channel data rate setting. Isolation Each channel is 2.5 KV isolated. Isolators used provide performance superior to alternatives such as optocoupler devices. Half and full duplex mode are supported. User Interface All channels are on front panel (SCSI-3 type (P4). The rear I/O connector can be use if the host card is designed for isolated signals. Alternative versions The Serial Communication Controller module is available in several configurations: - PSCC-100 specification 2.3 and run on 32-bit bus size at 33 MHz frequency. Both 3.3 and offer compatibility with a wide range of carrier boards. Data transfer operations can be formatted in 8-bit, 16-bit, 24-bit or 32-bit wide. Octal UART The PSCC-1008E provides 8 enhanced 16550 UARTs with the PCI Bus interface Integrated FIFO Each UART has its own 64 Byte of transmit and receive FIFO, a set of 16550 compatible control and status registers, and a baud rate generator for individual channel data rate setting. Isolation Each channel is 2.5 KV isolated. Isolators used provide performance superior to alternatives such as optocoupler devices. Half and full duplex mode are supported. User Interface All channels are on front panel (SCSI-3 type (P4). The rear I/O connector can be use if the host card is designed for isolated signals. Alternative versions The Serial Communication Controller module is available in several configurations: - PSCC-1008 Octal RS-42/485 UART - PSCC-1008E Octal isolated RS-422/ PSCC 1008E O CTAL I SOLATED RS-485/422 UART ww