Description (SASAnalyzers/Related Products)RX-108P-SLIMRX-108P-FITRX-108P-BUFFDR-SAS-3000 DR-SATA-3000DR-SAS-3004DR-SAS-30W4 Xgig-C001Xgig-C002Xgig-C004Xgig-B230SaXgig-B430SaXgig-S20ASaXgig-S40ASaBus Doc tor R X (USB-C on trolled Analyzers)Bus Doctor RX, 108 channels, 64M events bufferBus Doctor RX, 108 channels, 128M events bufferBus Doctor RX, 108 channels, 256M events bufferBus Doc tor R X (Bus Pods)Serial Attached SCSI pod, (1.5 & 3.0 Gb/s)(3)Serial ATA pod, (1.5 & 3.0 Gb/s)(3)4x SAS Pod, SATA Connectors, (1.5 & 3.0 Gb/s)(4)Wide Port SAS Pod, MicroGiga Connectors (1.5 & 3.0Gb/s)(4) Xgig AnalyzerSingle Slot Portable or Rack mountable Chassis Two Slot Portable or Rack mountable Chassis Four Slot Rack mountable Chassis 2 Connector SAS/SATA Blade4 Connector SAS/SATA Blade SAS/SATA Analysis Microcode (2 connectors) SAS/SATA Analysis Microcode (4 connectors) Model NumberDescriptionPM-SAS-3001PM-SAS-3002 P acketMaker II Traffic Gener at ors(1)SAS PacketMaker II, 1 Phy Link, (1.5 & 3.0 Gb/ features that are support-ed by the PM2 and can be utilized through the GUI.The PM2 supports Link and Port Mode (see Figure 3).In Link mode, users must insert the SAS addressesinto the Link Mode scripts. However in Port mode,the target SAS addresses are automatically locatedallowing for auto-insertion of these addresses.ThePM2 also has the ability to vary the OOB (Out-of-Band signalling) timing; this unique feature allowsthe duration and frequency of COMINIT, COMSAS andCOMWAKE to be easily adjusted to test initiator andtarget responses to such changes.Another unique feature is the hardware data genera-tion and comparison. Data patterns are generated,transmitted and then checked. Errors are recorded and logged.The PM2 also has analysis capabilities as it can monitor andrecord packet information and errors on the bus. If full SASdecode and analysis capabilities are required, the PM2 can beused with a Bus Doctor Serial Attached SCSI protocol analyzer. Figure 3: Link and Port ModesTrigger specifications, may be use