FEATURESKey hardware features include:Industrys most powerful trace capture: Xgig provides100% capture at full line rate of 10 Gb/s backed by thelargest trace buffer (2 GB per XFP port and 4 GB perblade) in the industry.Multiple protocol supported on a single blade: Bladessupport both 10GbE and Fibre Channel protocols.Multiple Data Tapping Methods: Two data tappingmethods give developers the option between nominalsignal quality impact and data stream clean-up.Multiple interface connection support: Xgig 10GbEblades support 850nm Multimode XFP, 1310nm Singlemode XFP, and copper XFP interfaces.Maximum time-sync group: Up to 32 ports can be timesynchronized under one domainExternal trigger in/out and reference clock in/outconnections: Allows synchronization with other testing systems.Client software features include:Capture and decoding of MAC pause frames for trafficcontrol analysisExtensive Ethernet-based Upper Layer Protocol (ULP)decoding and Expert analysis FCIP, iFCP, IP, and RDMA dec SpecificationsMechanicalLength: 11.5 inches (292 mm)Width: 6.125 inches (156 mm)Weight: 0.9 lbs (0.5 kg)Indicators: (green, yellow, off)In UseLinkLED x (application-specific)LED y (application-specific)Connectors:2 XFP connectors (optics or copper)Trigger In/Out: SMAReference Clock In/Out: SMAMinimum System RequirementSmall Configuration (sync group of up to 16 ports):Pentium III 800 MHz, 512 MB RAM min/1 GBpreferred, 40 GB disk space, 100/1000 Mb/s EthernetLarge Configuration (sync group of over 16 ports): Pentium 4 with 2 GHz or faster processor, 1 GBRAM min/2GB RAM supported, 80 GB disk space, 1000 Mb/s EthernetProtocol Support10GbE and Fibre ChannelSoftware FeaturesTraceControlMost complete trigger libraryMulti-level triggeringArm/Trigger from any layer of dataXFP Tx/Rx optical power readingAutomation supportTraceView100% configurable spreadsheetPowerful trace filter/search schemesCustomizable graphic decode supportHundreds of decodes, including 10G FC, 10GbE, FCIP, iFCP, iSCSI, IP BENEFITSFCoE Supported!Supports 10GbE, 10G Fib