DescriptionDimensionPart No.1Spring bonnet 1/2" + 3/4"0901515complete1" + 11/4"0901516 11/2" + 2"09015182Valve insert complete1/2" + 3/4"D06FA-1/2for D06F 1" + 11/4"D06FA-1B(without filter)11/2" + 2"D06FA-11/23Union seal washer1/2" 0901443(10 pcs.)3/4" 09014441" 090144511/4"0901446 11/2" 09014472"0901448 4Blanking plugwith O-ring R1/4"(5 pcs.)S06K-1/4 5Replacement filter 1/2" + 3/4"ES06F-1/2Ainsert for D06F1" + 11/4"ES06F-1B 11/2" + 2"ES06F-11/2A6O-ring set for D06F1/2" + 3/4"0901246(10 pcs.)1" + 11/4"0901499 11/2" + 2"09012487Clear filter bowl 1/2" + 3/4"SK06T-1/2with O-ring for D06F1" + 11/4"SK06T-1B 11/2" + 2"SK06T-11/28Brass filter bowl with 1/2" + 3/4"SM06T-1/2O-ring for D06F1" + 11/4"SM06T-1B 11/2" + 2"SM06T-11/2Automation and Control SolutionsHoneywell GmbHHardhofwegD-74821 MosbachPhone: (49) 6261 810Fax: (49) 6261 81309http://europe.hbc.honeywell.com www.honeyw ell.comManufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies FeaturesDVGW approvedUp to size 11/4" approved for low noise, Group 1 without limi-tationsThe outlet pressure is set by turning the adjustment knobThe set pressure is directly indicated on the set point scaleThe adjustment spring is not in contact with the potable waterThe valve insert is of high quality synthetic material and can be fully exchanged Integral fine filterAlso available without fittingsEasily retrofittable to convert valve to a reverse-rinsing filter combinationCan be retrofitted with an inlet non-return valve Inlet pressure balancing - fluctuating inlet pressure does not influence outlet pressureLight weightMeets KTW recommendations for potable waterRange of ApplicationTechnical DataMediumWater, compressed air* and nitrogen* in consi-deration of valid standards (e.g. DIN EN 12502)Inlet pressuremax. 16