Features20% Higher Cycle Performance Doubled multiplication bandwidthInstruction set enhancements for FFT, FIR and DCTNew EDMA 3.0 engine20-30% Smaller Code Size16-bit compact instructionsSPLOOP bufferEnhanced DevelopmentReal-time bandwidth managementMemory protectionBetter DebugException handlingCache coherency visibilityMemory Protection128128Unified Memory Controller (UMC) Memory ProtectionBandwidth Mgmt.IDMAData Path 1Data Path 2A Register FileInterrupt& ExceptionControllerS1L1M1xxxxData Memory Controller (DMC)External Memory Controller (EMC)DMA Slave I/F256Program Memory Controller (PMC)256128Master Port(CPU/ cache req.)PowerControl256L1D Cache/SRAML1P Cache/SRAML2 Cache/SRAMTo EDMA3.0256D1C64x+ CPUM2xxxxS2L2D2B Register FileInstruction Decode16/32-bit Instruction DispatchSPLOOP BufferInstruction FetchAdvanced EventTriggering(AET)Memory ProtectionBandwidth Mgmt.25625625612864Bandwidth Mgmt.32TMS320C64x+ DSP CoreNew FeatureImproved From C64x100% Object Code CompatibilityFixed & Flo specification (v2.1)One read EDMA event and one write EDMA event, which can be used by the EDMA controllerOne interrupt that can be used by the CPU. This interrupt can be generated as a result of one of the following conditions: transmit-data ready, receive-data ready, register-access ready, no-acknowledgement received, arbitration lostModule enable/disable capabilityFree data format modeI2CEMAC - Ethernet Media Access ControllerEMACThe feature set of the EMAC module may vary between C6000 devices. Please see the device- specific datasheet for a listing of supported features.Benefit: The EMAC module provides an efficient interface between the DSP core processor and the networked community. The EMAC supports both 10Base-T (10 Mbits/sec) and 100BaseTX (100 Mbits/sec), in either half or full duplex, with hardware flow control and quality-of-service (QoS) support.The basic feature set of the EMAC module is:EMAC acts as DMA master to either internal or external DSP memory spaceStandard Medi datasheet for a listing of supported f