DESCRIPTION V CC RI 2B1234 1314 5 RI 3A RI 1A R0 1 ENABLER0 2 RI 2A R0 3 RI 1B ENABLER0 4 RI 4A RI 4B GNDRI 3B 1012 11 1516SP26LV432TYPICAL APPLICATION CIRCUITNow Available in Lead-Free PackagingELBAN EE LBAN Et upn It uptuOWO LH GI He ract'no dZ -hgiHHGI He raCt'no DV DI>VHT)xam (H GIHHGI He raCt'no DV DI<VHT)nim (W OLeraCt'no DW O LV DI>VHT)xam (H GIHeraCt'no DW O LV DI<VHT)nim (W OLHGI He raCt'no Dn ep OH GIHeraCt'no DW O Ln ep OH GIH2Date: 04/27/06 SP26LV432 High Speed, Low Power Quad Differential Line Receiver Copyright 2006 Sipex CorporationABSOLUTE MAXIMUM RATINGSThese are stress ratings only and functional operation of the device atthese ratings or any other above those indicated in the operation sectionsof the specifications below is not implied. Exposure to absolute maximumrating conditions for extended periods of time may affect reliability andcause permanent damage to the device.VCC (Supply Voltage).+7.0VVCM (Common Mode Range).. 14V VDIFF (Differential Input Voltage).. 14V features Sipex's BiCMOS process allowinglow power operational characteristics of CMOS technology while meeting all of the demandsof the RS-422 serial protocol at 50Mbps under load. The RS-422 protocol allows up to tenreceivers to be connected to a multipoint bus transmission line. The SP26LV432 features areceiver enable control common to all four receivers and a high-Z output with 6mA source andsink capability. Since the cabling can be as long as 4,000 feet, the RS-422 receivers of theSP26LV432 are equipped with a wide (-7.0V to +7.0V) common-mode input voltage range toaccommodate ground potential differences. Quad Differential Line Receivers Compatible with the EIA standard forRS-422 serial protocol High-Z Output Control 14ns Typical Receiver Propagation Delays 60mV Typical Input Hysteresis Single +3.3V Supply Operation Common Receiver Enable Control 26LV32 industry standard footprint compatible -7.0V to +7.0V Common-Mode InputVoltage Range Switching Rates Up to 50Mbps Ideal for