Features Easy installation - includes all accessories,mounting bracket, reflector, and hardware Thru-beam models include both light source and receiver All models operate on AC or DC from 24 to 130 volts; relay or triac outputs Output relay contacts are rated at 5 amps High-speed response - limited by the outputrelay itself. 7 ms Beam Make or Beam Break Fiberoptic models available with infrared or redLED light sources All models equipped with sensitivity adjustments All models have red LED indicator showing status of output relay All models have green LED beam status indicator for easy alignment High-impact plastic case is dirt and moisturesealed Switching power supply eliminates failuresoften caused by power line transientsGating, sorting, and seal inspectionTypical ApplicationsCap and labelinspectionProduct inspectionand orientationU.S. EYE2-81General Application Photoelectric Sensors2Beam Break Mode Retroreflective (Models Include 78P Reflector)UCR-AUR-A Infrared 15 ft. 7 msOn/Off R SpecificationsU.S. EYEConnections and Dimensions U.S. EYEFIBER OPTIC(Refer to FiberopticLight Guide Section)RETROREFLECTIVE THRU-BEAM dual beam for long rangeOperating Range:24 to 130 VAC or VDCPower Consumption:2 VATemperature Range:-10 oC to + 50o C (14 oF to 122oF) Output: SPDT Relay Models: 5 amps @ 120 VACNormally de-energized before input occurs. Isolated Solid State TRIAC Models: 1 amp at 50oCResponse Time:Relax: 7 ms light or dark TRIAC: 8 msTimer Range:0.1 to 15 secondsContrast Indicator Models:Displays a 10 bar LED scaled reading of contrasting light levelLED Light Source Wavelength:Infrared (880 nm), Red (660 nm)Sensitivity Adjustment:Provided on all modelsBeam Status Indicator:(Green LED) ON when beam is establishedOutput Indicator:(Red LED) Follows status of output relay Cabling: 6 standard, 5-conductorAccessoriesModel # Miscellaneous CA-11/2 in. Conduit AdaptorFSR-1 Flexible Strain ReliefUMB-1 U.S. Eye BracketUSB-1 U.S. Eye Sub-BracketProduct subject to change without not General Application Photoelectric Sensors22-80