DESCRIPTIONThe standard SIM connector is specifically designed for handheld devicesrequiring secure subscriber identification.The connectors are available in a standard 6 pin configuration on a 2.54mmpitch and at optional heights of 0.8mm, 1.6mm or 2.4mm.Contacts are stamped, gold plated, rated at 0.5A, and 5000 mechanicalcycles.Our contact design is specifically rounded to avoid any possible damage during and after card insertion to the card itself, assuming normal use. The design also incorporates protection features to avoid contact damage duringthis operation such as contact snagging.In addition to our offering presented here, other operating heights are availableas custom alternatives.Please contact the appropriate sales office for further details of this service.KEY FEATURES AND BENEFITS Produced for use with both full ISO cards and micro SIM cards. Stand-off designs allow other components to be mounted underneaththe connector offering greater effective use of PCB real estate. Th features to avoid contact damage duringthis operation such as contact snagging.In addition to our offering presented here, other operating heights are availableas custom alternatives.Please contact the appropriate sales office for further details of this service.KEY FEATURES AND BENEFITS Produced for use with both full ISO cards and micro SIM cards. Stand-off designs allow other components to be mounted underneaththe connector offering greater effective use of PCB real estate. The insulator is molded from high temperature plastic enabling the connector to be used in convection or infrared soldering processes. Supplied on tape and reel packaging for pick and place assembly. RoHS Compliant.0.8mm PCB Pad Layout1.6mm / 2.4mm PCB Pad LayoutPCB PADS(6 POSITIONS)1.10 (0.043)TYP15.20 (0.598)0.77 (0.030)TYP1.00(0.039)1.00(0.039)2 PITCHES @ 2.540 = 5.08(0.100 = 0.200)1.10 (0.043)TYP0.77 (0.030)TYP1.00(0.039)1.00(0.039)2 PITCHES @ 2.540 = 5.08(0.100 = 0.120)4.42 (0.174)12.10 (0.476)15.20 (0.598) Connector Height 0.8mmConnector Height 1.6mmCo