FEATURESCompliant with the 300 PIN Multi-Source Agreement (MSA)Designed for up to 80km linksDWDM units available2.2 x 3.0 x 0.53 inch form factorOperating temperature -5 C to 70 CMulti-rate product applications support SONET, Ethernet, and FEC data ratesInternal Clean-up PLL (single or dual rate)10Gb/s optical serial in/out with 622/644/669 by 16 electrical SERDESInternal microprocessor controlled2C functionalityLow power dissipation (6 Watts typical)APD receiver sensitivity -26.0dBm @ BER = 10-12(OIF) compliantSelectable TX and RX reference clock rates ( 16 or 64)OVERVIEWFinisar has developed a line of 10Gb/s Long Reach (LR) transponders that incorporate all features required by the 300 PIN Multi-Source Agreement (MSA) and serial Optical Internetworking Forum (OIF) specification. This line of transponders from Finisar operate at 1550nm and are designed for links up to 80 kilometers.These products include the optical transmitter and receiver, laser bias and control circuitry as well as specification. This line of transponders from Finisar operate at 1550nm and are designed for links up to 80 kilometers.These products include the optical transmitter and receiver, laser bias and control circuitry as well as the electrical Mux/DeMux shown in Figure 1. control for applications ranging from 9.953Gb/s (SONET) to 11.3Gb/s (10GE with FEC). The transmitter and receiver reference clock rates are selectable for divide by 16 or 64. The optical receiver is based on a high sensitivity APD with typical sensitivity of -26.0dBm at a bit error rate (BER) 10-12.The optical transmitter employs Finisar's proprietary and patented design, which provides its users with the highest performance levels at the lowest cost.10GB/S OPTICAL TR1550nm Long ReachPBModuleParameterMin TypMaxUnitsReceiverSensitivity {BER = 10-12}-26-24dBmMaximum Overload {BER = 10-12}-7-5dBmRX Spectral Range12901600nmOptical Return Loss27dBJitter Tolerance and TransferGR 253 CompliantTransmitterOutput Power024dBmExtincti FEATURESCompliant with the 300 PIN Multi-