DescriptionThe MSW2001-200 and MSW2011-201 Series of Surface Mount Silicon PIN Diode SP2T Switches is manufactured using Aeroflex/Metelics proven hybrid manufacturing process incorporating High VoltagePIN Diodes and passive devices integrated within a ceramic substrate. This low profile, compact, surfacemount component, ( 8mm L x 5mm W x 2.5 mm H ) offers superior low and high signal performance tocomparable MMIC devices in QFN packages. The SP2T switches are designed in an asymmetrical topology to optimize Tx-Ant Loss and Tx-Rx Isolation performance. The MSW2001-200 has the Tx Port onthe Left Side, while the MSW2011-201 has the Tx Port on the Right Side for versatility of circuit boarddesign preference.Using PIN Diodes with lower thermal resistance ( < 10 C/W ), RF C.W. incident power levels of +50 dBmswitching applications @ +85 C. The lower PIN Diode series resistance ( < 1.0 ), coupled with the longerminority carrier lifetime, ( > 2 S), provides better IIP3 distortion values > + 90 Features Surface Mount SP2T Switch in Compact Outline: 8mm L x 5mm W x 2.5 mm H Higher Average Power Handling than Plastic ( 100 W C.W.) Higher Voltage > 500 Volts for Higher RF Peak Power ( 500 W ) Lower Insertion Loss ( 0.25 dB ) & Higher IIP3 ( 90 dBm ) Operates From + Voltage Only ( +5V, +28V, + 50V )RoHS CompliantTEL: 603-641-SEMI (7364) metelics-sales@aeroflex.com www.aeroflex.com/metelics2 ParameterSymbolUnitsTest ConditionsMinimumTypicalMaximum ValueValueValueFrequencyF MHz 400 - 4000Tx-Ant Insertion LossIL(Tx) dB 0 V @ 100 mA (Tx )| -0.25 || -0.35 |28V @ 20 mA (Rx) Ant-Rx Insertion LossIL(Rx)dB0V@ 100 mA (Rx )| -0.80 || -1.00 |28V @ 0 mA (Tx)Tx-Ant Return LossRL(Tx) dB0 V @ 100 mA (Tx )| -12 | | -20 |28V @ 20 mA (Rx)Ant-Rx Return LossRL(Rx)dB0 V @ 100 mA (Rx )| -12 || -17 |28V @ 0 mA (Tx)Tx-Rx IsolationIsol(Rx)dB0 V @ 100 mA (Tx )| -35 || -40 |28V @ 20 mA (Rx)Rx-Tx IsolationIsol(Tx)dB0 V @ 100 mA (Rx )| -12 || -15 |28V @ 0 mA (Tx)C.W. Incident PowerPinc(CW)dBm0 V @ 100 mA (Tx Specification Notes:1. The