FEATURES Low Profile (3.2mm) Excellent Clock Signal Generator For CPUs Excellent Aging Wide Frequency Range Available At Cut Crystal Surface Mount OPTIONS Tape & Reel All dimensions are typical unless otherwise specified Notes: 1. Available to meet 5ppm to 50ppm tolerances. 2. Stability depends on temp ranges, from 5ppm to 50ppm. 3. All specifications are subject to change without notice. Creating a Part Number WINTRNParameter Unit Condition MinTyp Max. Note Frequency RangeMHz 3.20 70.0 Nominal Frequency MHz Custom Frequency Tolerance ppm @25 5 50 Note 1 Frequency Stability ppm-20 to +70 5 50 Note 2 -20 +70 Standard Operating Temp. Range -40 +85 Extended Temp. Range -55 +125 Additional Ranges Available Shunt Capacitance(C 0 ) pF 7.0 Equival. Series Resistance(ESR) As Show Below Load Capacitance(C L ) pF Customer Specified 10 75 Other Options Available Drive Level mW 0.10 Aging Per Year ppm @25 3.0 Frequency Range Mode ESR()Max 3.200-6.176 Fundamental 200 6.176-40.320 Fundamental 80 24. specifications are subject to change without notice. Creating a Part Number WINTRNParameter Unit Condition MinTyp Max. Note Frequency RangeMHz 3.20 70.0 Nominal Frequency MHz Custom Frequency Tolerance ppm @25 5 50 Note 1 Frequency Stability ppm-20 to +70 5 50 Note 2 -20 +70 Standard Operating Temp. Range -40 +85 Extended Temp. Range -55 +125 Additional Ranges Available Shunt Capacitance(C 0 ) pF 7.0 Equival. Series Resistance(ESR) As Show Below Load Capacitance(C L ) pF Customer Specified 10 75 Other Options Available Drive Level mW 0.10 Aging Per Year ppm @25 3.0 Frequency Range Mode ESR()Max 3.200-6.176 Fundamental 200 6.176-40.320 Fundamental 80 24.576-40.000 3rd Overtone 80 40.000-40.320 3rd Overtone 100 Electrical 40.320-70.000 3rd Overtone 80 Stability Temp. Ranges Typical Temperature Characteristics ppm ppm ppm ppm ppm ppm ppm0 to +50 Y -10 to +60 Y -20 to +70 N Y -30 to +75 N Y -40 to +85 N Y -55 to +105 N Y Temperature Stability -55 to +125 N Y Mechanical Shock 100g for 6ms,h Please visit our website at http://www.win