DescriptionSPZB260 is a low power consumption ZigBee module optimized for embedded applications. It enables OEMs to easily add wireless capability to electronic devices.The module is based on SN260 ZigBee Network Processor which integrates a 2.4 GHz, IEEE 802.15.4-compliant tran802.15.4 PHY and MAC.24 MHz high stability Xtal is available aboard the module to perform the timing requirements as per ZigBee specifications.A single supply voltage is requested to power the module. An integrated 2.5 GHz specific Murata antenna is aboard. The voltage supply also determines the I/O ports level allowing an easy interface with the host system.serial interface (SPI) allowing the connections to a variety of Host microcontrollers.(for other information and details, please refer to SN260 Datasheet available at www.st.com)www.st.comContents SPZB2602/15 Contents1Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Pin settings . . . . . . . . . . . Features Integrated 2.4 GHz, IEEE 802,15,4-compliant transceiver:-95 dBm RX sensitivity+ 5 dBm in boost modeRX filtering for co-existence with IEEE 802.11g and Bluetooth devicesIntegrated VCO and loop filterIntegrated IEEE 802.15.4 PHY and MAC Controlled by a Standard Serial Line for an easy interface of host microcontrollers (SPI)program and data storage On board 24 MHz stable XtalIntegrated RC oscillator (typ 10 kHz) for low power operation 1 A power consumption in Deep sleep modeWatchdog timer and power on reset Pins available for Non-intrusive debug Single supply voltage 2.1 to 3.6 Vdc.Available Link and Activity outputs for external Indication / monitor CE compliantFCC compliant (FCC ID:S9NZB260A)Applications Industrial controlsSensor networkingMonitoring of remote systems Home applicationsSecurity systemsLighting controlsDescriptionSPZB260 is a low power consumption ZigBee module optimized for embedded applications. It enables OEMs to easily add wireless capability to electronic specifications.A single supply voltage is requ