descriptionThe EVAL6920D Evaluation Board integrates the high efficiency step up converter L6920D as well as the external components required for a typical application. The start up is guaranteed at 1V and the device is operating down to 0.6V. The output voltage can be adjusted from 2V to 5.2V and two fixed output voltages (3.3V and 5V) are also available. www.st.comEvaluation board schematicFeaturesEVAL6920D2/4 1 FeaturesR4, R5 should be selected in the range of 100k - 10M to minimize consumption and error due to current sunk pin (few nA).Figure 1.Package - TSSOP8Figure 2.Demoboard components (top side)Table 1.Evaluation board part listJumperPositionFunction J11-2Device enabled2-3Device disabledJ2NoneAdjustable using R4 and R5 (not mounted)1-23.3V output voltage2-35V output voltageEVAL6920DRevision history3/4Figure 3.Demoboard layout (top side)Figure 4.Demoboard layout (bottom side)2 Revision historyTable 2.Revision historyDateRevisionChanges22-Nov-20061First issueEVAL6920D4/4 Please FeaturesEVAL6920D2/4 1 FeaturesR4, R5 should be selected in the range of 100k - 10M to minimize consumption and error due to current sunk pin (few nA).Figure 1.Package - TSSOP8Figure 2.Demoboard components (top side)Table 1.Evaluation board part listJumperPositionFunction J11-2Device enabled2-3Device disabledJ2NoneAdjustable using R4 and R5 (not mounted)1-23.3V output voltage2-35V output voltageEVAL6920DRevision history3/4Figure 3.Demoboard layout (top side)Figure 4.Demoboard layout (bottom side)2 Revision historyTable 2.Revision historyDateRevisionChanges22-Nov-20061First issueEVAL6920D4/4 Please Read Carefully:Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (ST) reserve theright to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at anytime, without notice.All ST products are sold pursuant to STs terms and conditions of sale.Purchasers a Data BriefFor further information contact your