DescriptionThe RHF330 is a current feedback operational amplifier that uses very high-speed complementary technology to provide a large bandwidth of 1GHz in gains of 2 while drawing RHF330 offers 0.1dB gain flatness up to 160MHz with a gain of 2.With a slew rate of 1800V/s and an output stage optimized for standard 100 load, this device is highly suitable for applications where speed and low-distortion are the main requirements. The RHF330 is a single operator available in the Flat-8 hermetic ceramic package, saving board space as well as providing excellent thermal and dynamic performance.NC+VCC NC OUT -VCC NCIN -IN +CeramicFlat-8 145Pin connections(top view)www.st.com ContentsRHF3302/24 Doc ID 15576 Rev 1Contents1Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 32Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Demonstration board schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104Po Features Bandwidth: 1GHz (gain = +2)Quiescent current: 16.6mA Slew rate: 1800V/sInput noise: 1.3nV/ Hz Distortion: SFDR = -78dBc (10MHz, 2Vpp )100 load optimized output stage 5V power supply300krad MIL-STD-883 1019.7 ELDRS free compliant SEL immune at 125C, LET up to 110MEV.cm 2/mg SET characterized, LET up to 110MEV.cm 2/mg Applications Communication satellitesSpace data acquisition systemsAerospace instrumentationNuclear and high energy physicsHarsh radiation environmentsADC driversDescriptionThe RHF330 is a current feedback operational amplifier that uses very high-speed complementary technology to provide a large bandwidth of 1GHz in gains of 2 while drawing RHF330 offers 0.1dB gain flatness up to 160MHz with a gain of 2.With a slew rate of 1800V/s and an output stage optimized for standard 100 load, this device is highly suitable for applications where speed and low-distortion are the main requirements. The RHF330 is a single operator available in the Flat-8 hermetic ceramic packa specifications, grade definitions and product