DescriptionThe STG4160 is a high-speed CMOS low voltage single analog SPDT (single pole dual throw) switch or 2:1 multiplexer/demultiplexer switch fabricated in silicon gate C2MOS technology. It is designed to operate from 1.65 to 4.8V, making this device ideal for portable applications. It offers low ON resistance (0.40 typ.) at VCC = 4.3V. The SEL inputs are provided to control the switches.The switch S1 is ON (connected to common port D) when the SEL input is held high and OFF (high impedance state exists between the two ports) when SEL is held low. The switch S2 is ON (connected to common Port D) when the SEL input is held low and OFF (high impedance state exist between the two ports) when SEL is held high. Additional key features are fast switching speed, break-before-make delay time and ultra power consumption. All inputs and outputs are equipped giving them ESD immunity and transient excess voltage.Flip-chip8Table 1.Device summaryOrder codePackagePackingSTG4160BJRFlip-chip8Tape feature and 15 kV contact ESD protectionFeatures Wide operating voltage range: V CC (opr) = 1.65 to 4.8V Low power dissipation: I CC = 0.2A (max.) at T A = 85CLow "ON" resistance: R ON= 0.75 (TA = 25C) at VCC= 2.25VR ON= 0.50 (TA = 25C) at VCC= 3.0VR ON=0.40 (TA =25C) at VCC=4.3V Separate supply voltage for switch and control pins Latch-up performance exceeds 100mA per JESD 78, Class IIESD performance tested on common pin (D pin):15kV IEC-61000-4-2 ESD, contact discharge8kV HBM JESD22 A114-B Class IIESD performance tested on S1 and S2 pin:8kV IEC-61000-4-2 ESD, contact ESD performance test on all other pins:4kV HBM (JESD22 A114-B Class II)400V machine model (JESD22 A115-A)1500V charged-device model (JESD22 C101) Applications Mobile phonesDescriptionThe STG4160 is a high-speed CMOS low voltage single analog SPDT (single pole dual throw) switch or 2:1 multiplexer/demultiplexer switch fabricated in silicon gate C2MOS technology. It is designed to operate from 1.65 to 4.8V, making this dev specification is not implied. Exposu