description of the demonstration board.a layout of the top and bottom layers.some examples of typical configurations that can be tested with the board.www.st.com Board descriptionAN29952/13 Doc ID 15840 Rev 11 Board descriptionThis board is designed with versatility in mind. In particular, its components allow it to be configured as:a low-pass Sallen-Key circuit.a high-pass Sallen-Key circuit.a differential amplifier.an AC-coupled circuit.an in-loop compensation circuit.an out-of-loop compensation circuit.and numerous other possible configurations not described here.The board is designed for surface-mounted components in SOT23-5 (and SOT23-6) or SC70-5 (SC70-6) packages. It can be used to perform on-board characterization prior to the integration of STMicroelectronics products in your designs. Resistor and capacitor footprints are implemented in the 0805 series.A set of two decoupling capacitors have been implemented on both power supply pins so as to benefit from the maximum performan features set forth in this document shall immediately voidany warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, anyliability of ST.ST and the ST logo are trademarks or registered trademarks of ST in various countries.Information in this document supersedes and replaces all information previously supplied.The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. 2009 STMicroelectronics - All rights reservedSTMicroelectronics group of companiesAustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of Americawww.st.com June 2009Doc ID 15840 Rev 11/13AN2995Demonstratio Application Notes;Mobile Communications;Communications;Medical;Mobile Computing;TSV611;TSV612;TSV621;TSV622;TSV623;TSV624;TSV625;TSV6