DescriptionThe REM-1F Digital Display Controller serves as either a pump remote control station or a proportional pump controller (4-20 mA input) or both. The REM-1F controller can be used to vary the output of any solenoid metering pump with external stroke triggering. This is truly a plug-n-play accessory. A REM-1F controller to the external input jack of an LMI pump is all that is required for start-up. Similar connections can be made to other solenoid pumps. Power is supplied by a 15 VDC source from the LMI pump through the 4-conductor cable. For other pump brands, an external 9-15 VDC power supply is needed. The controller output, in the form of a solid statecontact closure, triggers the electronic metering pump. The output is adjustable to 0-360 strokes-per-minute (spm) or 0-360 strokes-per-hour (sph). In internal mode, a touch of the pressure-sensitive large, easy-to-read LCD digits. Pumping rate can be displayed in Strokes, Litres or Gallons, per minute or per hour. In the exte REM-1F Digital Display Remote Pump ControllerDescr REM-1F, Digital Display Remote Pump Controller, PolyBlend Accessory, Pump Remote Control Station, Proportioal pump controller, REM-1F controller, controller