Features 25 -100 Ampere, to 50 hp 480V and 600V Separate Design E horsepower listed ratings. No NEC de-rating calculation required Separate motor FLA and LRA listed ratings. No hp conversions needed for FLA/LRA rated loads Rotary and Toggle actuation models ULand CULlisted under File No. E191706 as manual motor controllers per UL Standard UL508 Specific listing for general use and resistive (heater) loads Listed for group applications per NEC 430-53(c) and (d) Base, DIN-rail and door mounting Listed for multiple conductors in each line and load terminal in 40-100A ratings Low heat producing current path, max 50C rise, 60/75C rated Listed for broad application range including for electrical discharge (ballast) lamps to 480V AC IEC 60947-1 rated, CE marked Listed and marked suitable as motor disconnect per NEC Section 430-109 Select the type of switch Select handle type Select shaft Select Auxiliary Contacts and/oraccessories (if required)enclosure disconnects when short circuit protecti Specifications are subject to change without notice.5M1001B&A Printed in U.S.A. For Nearest Sales Office1.800.964.4114 www.sea.siemens.com/salesShort Circuit WithstandRating and Fuse Class With Line Side Fusing With Load Side Fusing Ampere10 kA at18 kA at10 kA at 5 kA at18 kA atRating 480V Max480V Max600V Max480V Max480V Max 25H, K &RK5 (30A Max)40,H, K &RK54 Pole(60A Max) 40,H, K & RK5Ferraz (100A Max) Shawmut 3 PoleH, K & RK5H, K &A50P or lower(100A Max) RK5 let-through (30A Max)semiconductor60 fusesJ, T & CC(60A Max)(100A Max)H, K &RK5Ferraz 80 (150A Max) ShawmutH, K &RK5H, K &A50P or lower(150A Max)RK5 let-through(60A Max)semiconductor 100fuses(100A Max)Short Circuit Withstand Ratings For use as supplemental protection on the load side of the branch circuit overcurrent protective device. .625 in.(16 mm).093 in. dia. (2.2 mm).91 in. dia. (2.2 mm).165 in. dia. (4.2 mm)(56 mm)1.00 in. dia. (25 mm) 45 Disconnect SwitchesNon-Fusible Disconnect Switches Wallace & Tiernan, Dry Feed Systems,