datasheetpro.com - Apex Microtechnology

POWER OPERATIONAL AMPLIFIER UNEDITABLE

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The PB51 is a high voltage, high current amplifier designed to provide voltage and current gain for a small signal, general purpose op amp. Including the power booster within the feedback loop of the driver amplifier results in a composite amplifier with the accuracy of the driver and the extended output voltage range and current capability of the booster. The PB51 can also be used without a driver in some applications, requiring only an external current limit resistor to function properly.

Datasheet URL:

Relevant Keywords:

PB51U, PB51A, PB51

Related Datasheets:

Demonstration board user guidelines for single operational amplifiers

Rad-hard 550 MHz low noise operational amplifier

Rad-hard 1 GHz low noise operational amplifier

Rad-hard 550 MHz low noise operational amplifier

Rad-hard 1 GHz low noise operational amplifier

Rail-to-rail input/output 11 A, 120 kHz CMOS operational amplifiers

Dual wide band operational amplifier with high output current

Rail-to-rail input/output 11 A, 120 kHz CMOS operational amplifiers

Rail-to-rail input/output 29 A 420 kHz CMOS operational amplifiers

Rail-to-rail input/output 60 A 880 kHz CMOS operational amplifiers

POWER OPERATIONAL AMPLIFIER UNEDITABLE

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The MP39 is a cost-effective high voltage MOSFET power operational amplifier constructed with surface mount components on a thermally conductive but electrically isolated substrate.

Datasheet URL:

Relevant Keywords:

MP39U, MP39A, MP39

Related Datasheets:

Demonstration board user guidelines for single operational amplifiers

Rad-hard 550 MHz low noise operational amplifier

Rad-hard 1 GHz low noise operational amplifier

Rad-hard 550 MHz low noise operational amplifier

Rad-hard 1 GHz low noise operational amplifier

Rail-to-rail input/output 11 A, 120 kHz CMOS operational amplifiers

Dual wide band operational amplifier with high output current

Rail-to-rail input/output 11 A, 120 kHz CMOS operational amplifiers

Rail-to-rail input/output 29 A 420 kHz CMOS operational amplifiers

Rail-to-rail input/output 60 A 880 kHz CMOS operational amplifiers

HIGH VOLTAGE POWER OPERATIONAL AMPLIFIER UNEDITABLE

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The amplifier design is a dual power op amp on a single monolithic die. The quad output PA162 combines two dual op amp die in a single PSOP package. This approach provides a cost-effective solution to applications where multiple amplifiers are required or a bridge configuration is needed. Four independent amplifiers coupled with low quiescent current and very low THD makes this an ideal low-distortion 4- channel audio amplifier for applications such as laptops and computer speakers.

Datasheet URL:

Relevant Keywords:

PA162U, PA162DK, PA162

Related Datasheets:

10MHz, Low Noise, Low Voltage, and Low Power Operational Amplifier

High Voltage Power Operational Amplifier

HIGH VOLTAGE POWER OPERATIONAL AMPLIFIER UNEDITABLE

Power Operational Amplifier

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The PA79 is a dual high voltage, high speed Precision IC power op amp with performance and unique features not found previously in any commercially available OpAmp. This approach provides a cost-effective, high density solution to applications where multiple amplifiers are required.

Datasheet URL:

Relevant Keywords:

PA79U, PA79DK, PA79

Related Datasheets:

Demonstration board user guidelines for single operational amplifiers

Rad-hard 550 MHz low noise operational amplifier

Rad-hard 1 GHz low noise operational amplifier

Rad-hard 550 MHz low noise operational amplifier

Rad-hard 1 GHz low noise operational amplifier

Rail-to-rail input/output 11 A, 120 kHz CMOS operational amplifiers

Dual wide band operational amplifier with high output current

Rail-to-rail input/output 11 A, 120 kHz CMOS operational amplifiers

Rail-to-rail input/output 29 A 420 kHz CMOS operational amplifiers

Rail-to-rail input/output 60 A 880 kHz CMOS operational amplifiers

POWER BOOSTER AMPLIFIERS

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The PB50 is a high voltage, high current amplifier designed to provide voltage and current gain for a small signal, general purpose op amp. Including the power booster within the feedback loop of the driver amplifier results in a composite amplifier with the accuracy of the driver and the extended output voltage range and current capability of the booster. The PB50 can also be used without a driver in some applications, requiring only an external current limit resistor to function properly.

Datasheet URL:

Relevant Keywords:

PB50U, PB50

Related Datasheets:

BGD712_4 750 MHz, 18.5 dB gain power doubler amplifier

BGD804_3 860 MHz, 20 dB gain power doubler amplifier

BGD702 750 MHz, 18.5 dB gain power doubler amplifier

BGY687_4 600 MHz, 21.5 dB gain push-pull amplifier

25 W + 25 W dual BTL class-D audio amplifier

3 W filter-free class-D audio amplifier demonstration board with 6-12 dB fixed gain select based on TS2007

Filter-free stereo 2x2.5 W Class-D audio power amplifier demonstration board based on the TS2012FC

Demonstration board user guidelines for single operational amplifiers

Rad-hard 550 MHz low noise operational amplifier

RF power amplifier using 1 x PD54003L-E N-channel enhancement-mode lateral MOSFETs

POWER OPERATIONAL AMPLIFIER UNEDITABLE

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The MP38 is a cost-effective high voltage MOSFET power operational amplifier constructed with surface mount components on a thermally conductive but electrically isolated substrate.

Datasheet URL:

Relevant Keywords:

MP38U, MP38A, MP38

Related Datasheets:

Demonstration board user guidelines for single operational amplifiers

Rad-hard 550 MHz low noise operational amplifier

Rad-hard 1 GHz low noise operational amplifier

Rad-hard 550 MHz low noise operational amplifier

Rad-hard 1 GHz low noise operational amplifier

Rail-to-rail input/output 11 A, 120 kHz CMOS operational amplifiers

Dual wide band operational amplifier with high output current

Rail-to-rail input/output 11 A, 120 kHz CMOS operational amplifiers

Rail-to-rail input/output 29 A 420 kHz CMOS operational amplifiers

Rail-to-rail input/output 60 A 880 kHz CMOS operational amplifiers

Video Power Operational Amplifier

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The PA19 is a high voltage, high current operational amplifier optimized to drive a variety of loads from DC through the video frequency range. Excellent input accuracy is achieved with a dual monolithic FET input transistor which is cascoded by two high voltage transistors to provide outstanding common mode characteristics. All internal current and voltage levels are referenced to a zener diode biased on by a current source. As a result, the PA19 exhibits superior DC and AC stability over a wid

Datasheet URL:

Relevant Keywords:

PA19U, PA19A, PA19, PA19A

Related Datasheets:

Precision low power CMOS quad operational amplifiers

Low drop dual power operational amplifier

Dual power operational amplifiers

AD8682/AD8684 Dual/Quad Low Power, High Speed JFET Operational Amplifiers Data Sheet (Rev. A)

OP221 Dual Low Power Operational Amplifier, Single or Dual Supply Data Sheet (Rev. C)

High-speed low power quad operational amplifier with dual standby position

LOW POWER SINGLE OPERATIONAL AMPLIFIER AS321 Data

3A power operational amplifier

HIGH VOLTAGE POWER OPERATIONAL AMPLIFIER UNEDITABLE

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The PA83 is a high voltage operational amplifier designed for output voltage swings up to ±145V with a dual (±) supply or 290V with a single supply. Its input stage is protected against transient and steady state overvoltages up to and including the supply rails. High accuracy is achieved with a cascode input circuit configuration. All internal biasing is referenced to a zener diode fed by a FET constant current source. As a result, the PA83 features an unprecedented supply range a

Datasheet URL:

Relevant Keywords:

PA83U, PA83A, PA83

Related Datasheets:

10MHz, Low Noise, Low Voltage, and Low Power Operational Amplifier

High Voltage Power Operational Amplifier

HIGH VOLTAGE POWER OPERATIONAL AMPLIFIER UNEDITABLE

POWER BOOSTER AMPLIFIERS

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The PB58 is a high voltage, high current amplifier designed to provide voltage and current gain for a small signal, general purpose op amp. Including the power booster within the feedback loop of the driver amplifier results in a composite amplifier with the accuracy of the driver and the extended output voltage range and current capability of the booster. The PB58 can also be used without a driver in some applications, requiring only an external current limit resistor to function properly.

Datasheet URL:

Relevant Keywords:

PB58U, PB58A, PB58

Related Datasheets:

BGD712_4 750 MHz, 18.5 dB gain power doubler amplifier

BGD804_3 860 MHz, 20 dB gain power doubler amplifier

BGD702 750 MHz, 18.5 dB gain power doubler amplifier

BGY687_4 600 MHz, 21.5 dB gain push-pull amplifier

25 W + 25 W dual BTL class-D audio amplifier

3 W filter-free class-D audio amplifier demonstration board with 6-12 dB fixed gain select based on TS2007

Filter-free stereo 2x2.5 W Class-D audio power amplifier demonstration board based on the TS2012FC

Demonstration board user guidelines for single operational amplifiers

Rad-hard 550 MHz low noise operational amplifier

RF power amplifier using 1 x PD54003L-E N-channel enhancement-mode lateral MOSFETs

POWER OPERATIONAL AMPLIFIER UNEDITABLE

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The MP240 operational amplifier is a surface mount constructed component that provides a cost effective solution in many industrial applications. The MP240 offers outstanding performance that rivals much more expensive hybrid components yet has a footprint of only 4.7 sq in. The MP240 has many optional features such as four-wire current limit sensing, a shutdown control and external compensation. In addition, the class A/B output stage biasing can be turned off for lower quiescent current with c

Datasheet URL:

Relevant Keywords:

MP240U, MP240

Related Datasheets:

Demonstration board user guidelines for single operational amplifiers

Rad-hard 550 MHz low noise operational amplifier

Rad-hard 1 GHz low noise operational amplifier

Rad-hard 550 MHz low noise operational amplifier

Rad-hard 1 GHz low noise operational amplifier

Rail-to-rail input/output 11 A, 120 kHz CMOS operational amplifiers

Dual wide band operational amplifier with high output current

Rail-to-rail input/output 11 A, 120 kHz CMOS operational amplifiers