datasheetpro.com - Artesyn Technologies

LDO06C Series 3 Vdc to 13.8 Vdc Input Single Output DC-DC CONVERTERS C Class Non-isolated

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The LDO06C series is a new high density, open frame, non-isolated converter for space sensitive applications. This model has a wide input range of 3-13.8 V and offers a 0.59-5.1 V adjustable output with 6 A capability. Typical efficiency for this model is 92% (5 Vin, 2.5 Vout, 6 A load). The 5 pin version of this voltage device offers the standard features of enable, and with a default wide adjustable output voltage range or option of power good.

Datasheet URL:

Relevant Keywords:

LDO06C-005W05-VJ, LDO06C-005W05-SJ, LDO06C-005W05-HJ, LDO06C

Related Datasheets:

LDO03C Series 3 Vdc to 13.8 Vdc Input Single Output DC-DC CONVERTERS C Class Non-isolated

LDO10C Series 3 Vdc to 13.8 Vdc Input Single Output DC-DC CONVERTERS C Class Non-isolated

SRBA-06F2Ax NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input 0.75 Vdc - 3.63 Vdc/6 A Output

SRBA-06F1Ax NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input 0.75 Vdc - 3.63 Vdc/6 A Output

SRBA-06E1Ax NON-ISOLATED DC/DC CONVERTERS 4.5 Vdc - 14 Vdc Input 0.75 Vdc - 5.0 Vdc/6 A Output

SRBA-06A2Ax NON-ISOLATED DC/DC CONVERTERS 8.3 Vdc - 14 Vdc Input 0.75 Vdc - 5.5 Vdc/6 A Output

SRBA-06A1Ax NON-ISOLATED DC/DC CONVERTERS 8.3 Vdc - 14 Vdc Input 0.75 Vdc - 5.0 Vdc/6 A Output

SRBA-03F1Ax NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input 0.75 Vdc - 3.63 Vdc/3 A Output

SRBA-03E1Ax NON-ISOLATED DC/DC CONVERTERS 4.5 Vdc - 14 Vdc Input 0.75 Vdc - 5.0 Vdc/3 A Output

SRBA-03A1Ax NON-ISOLATED DC/DC CONVERTERS 8.3 Vdc - 14 Vdc Input 0.75 Vdc - 5.0 Vdc/3 A Output

NLS110-9602J Quad output

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The NLS110-9602J is a 110 W universal input ac-dc power supply on a 7 x 4.25 inch card. The NLS110-9602J has proven itself to be highly reliable and versatile product for a wide range of communication and industrial applications, with a very high peak current capability on each output for drive and motor applications. The NLS110-9602J provides 80 W of output power with free air convection cooling which can be boosted to 110 W with 20 CFM of air. Standard features include overvoltage and short ci

Datasheet URL:

Relevant Keywords:

NLS110-9602J

Related Datasheets:

IFS-3Multiple Output Modulatorthink aheadww.trilit

M54HC1232/11IEC LOGIC SYMBOLS INPUT AND OUTPUT EQU

Rad-hard octal D-type flip flop with 3 state output non inverting

MEMS motion sensor: dual axis pitch and yaw 500/s analog output gyroscope

Rad-hard octal D-type latch with 3 state output non inverting

Rad-hard 8 binary counter register with 3 state output

MEMS motion sensor: dual axis pitch and yaw 1500/s analog output gyroscope

Enhanced AC coupled HDMI level shifter with configurable HPD output

Dual wide band operational amplifier with high output current

VIPOWER: VIPER22A SINGLE OUTPUT REFERENCE BOARD 90 TO 264 VAC INPUT, 10W OUTPUT

SIP20 SERIES Single output

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The SIP20 series are non-isolated DC/DC converters packaged in a single-in-line footprint (2.5 x 0.55 x 0.23 inches) giving designers a cost effective solution for conversion of 5VDC to 3.3VDC and lower voltages. Design flexibility is ensured with local voltage conversion by the SIP20 from existing system voltages by eliminating the need for redesign of existing power architectures. The SIP20 was designed for applications that include distributed power, workstations, computers and file servers.

Datasheet URL:

Relevant Keywords:

SIP20-05S3V3RF, SIP20-05S3V3, SIP20-05S2V5, SIP20-05S1V5, SIP20

Related Datasheets:

VIPOWER: VIPER22A SINGLE OUTPUT REFERENCE BOARD 90 TO 264 VAC INPUT, 10W OUTPUT

MEMS inertial sensor single-axis analog and digital output yaw rate gyroscope

ADC1410S065/080/105/125 Single 14-bit ADC 65, 80, 105 or 125 Msps CMOS or LVDS DDR digital outputs

MEMS inertial sensor single-axis analog and digital output yaw rate gyroscope

ADA4855-3 Single-Supply, High Speed, Rail-to-Rail Output, Triple Op Amp Data Sheet (Rev. 0)

MEMS inertial sensor single-axis analog and digital output yaw rate gyroscope

MT-035: Op Amp Inputs, Outputs, Single-Supply, and Rail-to-Rail Issues

MEMS inertial sensor single-axis analog and digital output yaw rate gyroscope

MEMS inertial sensor: single-axis 300/s analog output yaw rate gyroscope

LT6202/LT6203/LT6204 - Single/Dual/Quad 100MHz, Rail-to-Rail Input and Output, Ultralow 1.9nV/Hz Noise, Low Power Op Amps

SMT15E Series 15 A DC-DC E Class Non-Isolated DC-DC Converters

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

THE SMT15E-12 series are non-isolated dc-dc converters packaged in a single-inline footprint giving designers a cost effective solution for conversion from a 10 Vdc to 14 Vdc input to output voltages of 0.8 Vdc to 3.63 Vdc. The SMT15E-12 offers a wide outputs trim range, which allows maximum design flexibility and a pathway for future upgrades.

Datasheet URL:

Relevant Keywords:

SMT15E-12W3V3J, SMT15E-12V, SMT15E-12, SMT15E, 12.pdf

Related Datasheets:

S7BC-10F2Ax Series NON-ISOLATED DC/DC CONVERTERS 2.4V-5.5V Input 0.75V-3.63V/10A Output

S7BC-10E2Ax Series NON-ISOLATED DC/DC CONVERTERS 4.5V-14V Input 0.75V-3.63V/10A Output

S7BA-06F2Ax Series NON-ISOLATED DC/DC CONVERTERS 2.4V-5.5V Input 0.75V-3.63V/6A Output

S7BA-03E1Ax Series NON-ISOLATED DC/DC CONVERTERS 4.5V-14V Input 0.75V-5.0V/3A Output

SRBA-06F2Ax NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input 0.75 Vdc - 3.63 Vdc/6 A Output

SRBA-06F1Ax NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input 0.75 Vdc - 3.63 Vdc/6 A Output

SRBA-06E1Ax NON-ISOLATED DC/DC CONVERTERS 4.5 Vdc - 14 Vdc Input 0.75 Vdc - 5.0 Vdc/6 A Output

SRBA-06A2Ax NON-ISOLATED DC/DC CONVERTERS 8.3 Vdc - 14 Vdc Input 0.75 Vdc - 5.5 Vdc/6 A Output

SRBA-06A1Ax NON-ISOLATED DC/DC CONVERTERS 8.3 Vdc - 14 Vdc Input 0.75 Vdc - 5.0 Vdc/6 A Output

SRBA-03F1Ax NON-ISOLATED DC/DC CONVERTERS 2.4 Vdc - 5.5 Vdc Input 0.75 Vdc - 3.63 Vdc/3 A Output

NLP40 Series Single , dual and triple output

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The NLP40 series is a 40 W universal input ac-dc power supply on a 4.25 x 2.5 inch card with a maximum component height of 1.15 inches for use in 1U applications. This product is the smallest standard 40 W package in the industry making the series ideal for communication applications with space constraints where a standard 5 x 3 inch card solution is not suitable. The NLP40 provides 40 W of output power with free air convection cooling which can be boosted to 50 W with 20 CFM of air. Standard fe

Datasheet URL:

Relevant Keywords:

NLP40-7612J, NLP40-7627J, NLP40-7610J, NLP40-7624J, NLP40-7608J, NLP40-76T366J, NLP40-7617J, NLP40-7605J, NLP40-76S3J, NLP40-7615J, NLP40, NLP40-7629J

Related Datasheets:

LT1494/LT1495/LT1496 - 1.5mA Max, Single, Dualand Quad over -The-Top Precision Rail-to-Rail Input and Output Op Amps

LT1720/LT1721 - Dual/Quad, 4.5ns, Single Supply 3V/5V Comparators with Rail-to-Rail Outputs

ADCMP361 Single 0.275% Comparator and Reference with Dual Polarity Outputs Data Sheet (Rev. 0)

A and F SERIES Single and dual output

AFC5 SERIES Single and dual output

BXA10 Series Single and dual output

BXA10 Series Single and dual output 8-10W Wide Input DC/DC Converters

BXA15 Series Single and dual output

NLP150L Single and Triple Application Note 124

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

A block diagram of the NLPL150L Single and Triple power supply is shown in Figure 1. There is a designated harmonic current correction (HCC) stage to ensure the product meets EN61000-3-2 harmonic content requirements.

Datasheet URL:

Relevant Keywords:

NLP150L-96S8, NLP150LST.PDF, NLP150L-96S6, NLP150L-96T658, NLP150L-96S5, NLP150L-96T536, NLP150L-96S3, NLP150L-96S9, NLP150L

Related Datasheets:

EV0030 20W STEREO CLASS D SINGLE ENDED AUDIO AMPLI

102 X 65 SINGLE CHIP LCD CONTROLLER / DRIVER

Programmable single phase energy metering IC with tamper detection

Demonstration board user guidelines for single operational amplifiers

Low voltage 1 max single SPDT switch with break-before-make feature

Low voltage 0.5 &#937; single SPDT switch with break-before-make feature and 15 kV contact ESD protection

TS612 as driver for ADSL line interfaces - a single supply implementation with passive or active impedance matching

Demonstration board for single op-amps in SC70 or SOT-23 packages

VIPOWER: VIPER22A SINGLE OUTPUT REFERENCE BOARD 90 TO 264 VAC INPUT, 10W OUTPUT

STLC3055N SINGLE SUPPLY SLIC FOR WILL APPLICATION

BXA15 Series Single and dual output 15W Wide Input DC/DC Converters

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The BXA15 Series, comprising 15 different models, has been conceived as an applications specific range of DC/DC converters, specifically addressing telecommunications, industrial electronics, test equipment, mobile telecommunications and distributed power applications. The series offers three wide input voltage ranges, 9-18VDC, 18-36VDC and 36-75VDC, and is available in single and dual output versions. Designed to meet ETSI telecoms interface standards ETS300-132-2 and BTR2511, together with in

Datasheet URL:

Relevant Keywords:

BXA15-12S15, BXA15-48S05, BXA15-24S12, BXA15-12S12, BXA15-48D15, BXA15-24S05, BXA15-48S15, BXA15-12S05, BXA15-48D12, BXA15-24D15, BXA15-48S12-F, BXA15-12D12, BXA15-48D05, BXA15-24D12, BXA15-48S12, BXA15, BXA15-24S15

Related Datasheets:

BXA10 Series Single and dual output 8-10W Wide Input DC/DC Converters

BXA15 Series Single and dual output 15W Wide Input DC/DC Converters

BXA3 Series Single and dual output 3W Wide Input DC/DC Converters

BXA3 Series Single and dual output 3 W Wide Input DC-DC Converters

BXA3 Series Single and dual output 3W Wide Input DC/DC Converters

BXA30 Series Single and dual output 30 W Wide Input DC-DC Converters

BXA30 Series Single and dual output 30W Wide Input DC/DC Converters

EXB100 Series Single output DC-DC CONVERTERS 54-100 W DC-DC Isolated Converters

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The EXB100 series of 100 W single output isolated dc-dc converters are specially designed to meet the power needs of low voltage silicon. Housed in an open-frame package with standard footprint, these latest generation converters offer efficiencies as high as 90.5% (typical on 3.3 V at 30 A). The series comprises two 48 V input models with 3.3 V and 1.8 V outputs. All models feature a wide input range, trimmable output voltage and 30 A output. Remote sense and remote ON/OFF facilities are includ

Datasheet URL:

Relevant Keywords:

EXB100-48S3V3, EXB100-48S1V8-RJ, EXB100-48S1V8 (9), EXB100-48S1V8, EXB100

Related Datasheets:

EXB100 Series Single output DC-DC CONVERTERS 100 W DC-DC Isolated Converters

EXB100 Series Single output DC-DC CONVERTERS 54-100 W DC-DC Isolated Converters

TQN8A Series Single output 100W/8.3A Isolated DC/DC Converters

70W DC-DC Converter Single Output, Isolated

DN435 - Single Resistor Sets Positive or Negative Output for DC/DC Converter

xRSB-40U Series ISOLATED DC/DC CONVERTERS 24 Vdc/48 Vdc Input 1.2 Vdc - 12 Vdc / 18 A - 3.5 A Outputs, 1/16 Brick

BXA10 Series Single and dual output 8-10W Wide Input DC/DC Converters

BXA15 Series Single and dual output 15W Wide Input DC/DC Converters

NLP65 SERIES Cover, connector and mounting kit 5

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

L-bracket and slotted cover, Assembly instructions, Mounting screws, Crimp, terminals, Mating connectors

Datasheet URL:

Relevant Keywords:

NLP65

Related Datasheets:

NLP40 Series Cover, connector and mounting kit

NLP65 Series Cover connector and mounting kit

DATA SHEET Panel Mount ConnectorBNC-27DescriptionP

DATA SHEET PCB ConnectorBNC-34DescriptionPCB Mount

DATA SHEET Panel Mount ConnectorBNC-33DescriptionB

PCMCIA PC Memory Card Connectors Frameless Card Kit - Product Selection Guide 9170 PCMCIA Type II Frameless Card Kit

NLP110 Series Mounting bracket accssory kit

NLP40 Series Cover and mounting bracket accessory kit

NLP40 Series Mounting bracket accessory kit

NLP65 Series Mounting bracket accessory kit

SIL15 Series Single output 15A Non-Isolated DC/DC Converters

DatasheetPro — Thu, 04 Dec 2008 06:18:34 +0000

The SIL15 Series is a new high density open frame non-isolated converter for space-sensitive applications. Each model has a wide input range (4.5V to 5.5V or 10.2V to 13.8V) and offer a wide 0.9V to 3.3V/5V output voltage range with a 15A load. An external resistor adjusts the output voltage from its pre-set value of 0.9V to any value up to the maximum allowed value for that model. Typical efficiencies are 89% for the 5V input version and 91% for the 12V input version. The SIL15 series offers re

Datasheet URL:

Relevant Keywords:

SIL15.PDF, SIL15-12SADJ-V, SIL15-05SADJ-V, SIL15-05SADJ-H, SIL15

Related Datasheets:

LDO06C Series 3 Vdc to 13.8 Vdc Input Single Output DC-DC CONVERTERS C Class Non-isolated

LDO03C Series 3 Vdc to 13.8 Vdc Input Single Output DC-DC CONVERTERS C Class Non-isolated

LDO10C Series 3 Vdc to 13.8 Vdc Input Single Output DC-DC CONVERTERS C Class Non-isolated

SIL10 Series Single output 10A Non-isolated DC/DC Converters

SIL10E Series 3.0 Vin to 5.5 Vin single output DC-DC CONVERTERS E Class Non-isolated

SIL10E Series 12 Vin single output DC-DC CONVERTERS E Class Non-isolated

SIL15C Series 5 Vin and 12 Vin single output DC-DC CONVERTERS C Class Non-isolated

SIL15E Series Single output 38 to 50W Non-isolated DC/DC Converters